Talk:RaspberryPi2EGLFS: Difference between revisions

From Qt Wiki
Jump to navigation Jump to search
(Incorrect suggestion to run `sudo rpi-update`)
(posted regarding a 'broken link' to a library.)
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''I got this error in make step'''
== Asking Questions ==


 
Please post questions about building Qt for Raspberry Pi in the [https://forum.qt.io/ Qt forums].  This talk page can be used to talk about improving the article.
qeglfsbrcmintegration.cpp:35:22: fatal error: bcm_host.h: No such file or directory
 
#include <bcm_host.h>
 
                     
compilation terminated.
 
make[6]: *** [.obj/qeglfsbrcmintegration.o] Error 1
 
make[6]: Leaving directory `/home/hamed/raspi/qtbase/src/plugins/platforms/eglfs/deviceintegration/eglfs_brcm'
 
make[5]: *** [sub-eglfs_brcm-make_first] Error 2
 
make[5]: Leaving directory `/home/hamed/raspi/qtbase/src/plugins/platforms/eglfs/deviceintegration'
 
make[4]: *** [sub-deviceintegration-make_first-ordered] Error 2
 
make[4]: Leaving directory `/home/hamed/raspi/qtbase/src/plugins/platforms/eglfs'
 
make[3]: *** [sub-eglfs-make_first] Error 2
 
make[3]: Leaving directory `/home/hamed/raspi/qtbase/src/plugins/platforms'
 
make[2]: *** [sub-platforms-make_first] Error 2
 
make[2]: Leaving directory `/home/hamed/raspi/qtbase/src/plugins'
 
make[1]: *** [sub-plugins-make_first] Error 2
 
make[1]: Leaving directory `/home/hamed/raspi/qtbase/src'
 
make: *** [sub-src-make_first] Error 2
 
hamed@hamed-PC ~/raspi/qtbase $
 
== I edited this topic to add the solution to this error (fatal error: bcm_host.h: No such file or directory) ==
to solve this problem just add these lines
 
INCLUDEPATH  += $[QT_SYSROOT]/opt/vc/include
 
INCLUDEPATH  += $[QT_SYSROOT]/opt/vc/include/interface/vcos
 
INCLUDEPATH  += $[QT_SYSROOT]/opt/vc/include/interface/vcos/pthreads
 
INCLUDEPATH  += $[QT_SYSROOT]/opt/vc/include/interface/vmcs_host/linux
 
to these two files:
"qtbase/mkspecs/devices/linux-rasp-pi-g++/qmake.conf"
 
and:
 
"qtbase/mkspecs/devices/linux-rasp-pi2-g++/qmake.conf"
 
after save the files repeat these two steps "configure" and "make"
 
the refrence is this [http://forum.qt.io/topic/62264/failed-to-cross-compile-qt-5-6-on-rpi-2-fatal-error-bcm_host-h-no-such-file-or-directory/3 thread]
 
 
 
 
'''Different error in the make step'''
http://stackoverflow.com/questions/34685488/qt-5-6-cross-compile-for-raspberry-pi-with-eglfs
 
== QT Serial Port install in cross-compile environment ==
 
I am attempting to adapt the instructions linked here: [[Qt Serial Port]] to this cross-compile environmentThe Qt Serial Port page suggests that Qt Serial Port is included in Qt5, however I cannot seem to find it. Has it been removed? I am running QT 5.4.2. on my host system.
 
If I have to install Qt Serial Port, then I am not sure how to successfully install it in this cross-compile environment. Can anyone help with this? Thank you!
 
== Prerequisites to run cross compile tools on fresh Ubuntu/Debian x64 ==
 
To run the tools on a host running Ubuntu / Debian x64, the following libraries are necessary:<br />
$ sudo apt-get install lib32stdc++6 lib32z1 lib32ncurses5
 
Otherwise, errors like this might occur:
arm-linux-gnueabihf-g++: Command not found
or
arm-linux-gnueabihf-g++: Kommando nicht gefunden
--[[User:Woehrl.biz|Woehrl.biz]] ([[User talk:Woehrl.biz|talk]]) 08:06, 26 April 2016 (UTC)
 
== X C Bindings ==
 
I had to add the following parameter to the configure command:<br/>
'''-qt-xcb'''
 
Otherwise the following error is shown:<br/>
The test for linking against libxcb and support libraries failed!
  You might need to install dependency packages, or pass -qt-xcb.
  See src/plugins/platforms/xcb/README.
--[[User:Woehrl.biz|Woehrl.biz]] ([[User talk:Woehrl.biz|talk]]) 09:42, 26 April 2016 (UTC)
 
== Illegal instruction ==
 
I just set up a fresh Ubuntu 14.04 and RPiZero Raspbian.
 
I followed this tutorial and everything worked (after using the discussion page fixes) except for the example.
 
I built the example without errors, deployed it, set up the libraries, etc.
 
When I run the example on  the Pi I simply get "Illegal Instruction". Nothing else.
 
I turned on logging and don't see the log output anywhere that I can find.
 
EDIT: I don't know if you just want me to delete this. I found the problem. I was building for the pi2 and trying to run it on the pi zero. Sorry about that. I am new to this stuff. I figured out how to build for pi 1 / zero and now everything works. This is awesome!!!
 
== libinput not detected by configure script ==
 
Hi.
In this excellent tutorial it is said that one must make sure that libinput is set to "yes"
in configure's summary report.
 
I have libinput installed, and the library files and headers are in the sysroot path as required.
Yet configure does not detect it. Even when I add the -libinput argument to the configure command line.
 
The test widget however compiles and runs fine on my Pi2.
 
Is libinput really required, and why?
 
Thanks!
 
== could not find or load the Qt platform plugin "eglfs" ==
 
After following the tutorial, when running qopenglwidget I get the following error:
 
This application failed to start because it could not find or load the Qt platform plugin "eglfs"
in "".
 
Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, xcb.
 
Reinstalling the application may fix this problem.
Aborted
 
Since we are going to build Qt5 for Pi, I don't really get why
one must INSTALL certain modules of Qt BEFORE the build?
 
== Initial ==
 
Hi.
 
I just tried this tutorial on a Raspberry Pi 3, and encountered the following problem:
 
pi@raspberrypi:~ $ sudo apt-get build-dep libqt5gui5
Reading package lists... Done
Building dependency tree
Reading state information... Done
Picking 'qtbase-opensource-src' as source package instead of 'libqt5gui5'
The following packages have unmet dependencies:
libgles2-mesa-dev : Depends: libegl1-mesa-dev but it is not going to be installed
libopenvg1-mesa-dev : Depends: libegl1-mesa-dev but it is not going to be installed
E: Build-dependencies for libqt5gui5 could not be satisfied.
 
Any hints?
 
Thanks,
OJ
 
Greetings to all from Argentina.
I'm trying to install this OpenGL accelerator
I have a compilation with lots of errors how can I upload the text file with the screen output?
They are many pages of text.
 
Thank you very much.


== small fix to the relativelink fixing script ==
== small fix to the relativelink fixing script ==
Line 201: Line 39:
I have Ubuntu 16.04 x64 and Qt Creator 5.10.1 x64 witch version of qt base should I choose?
I have Ubuntu 16.04 x64 and Qt Creator 5.10.1 x64 witch version of qt base should I choose?
for compile on raspberry pi 3 with Raspbian stretch x32 OS?
for compile on raspberry pi 3 with Raspbian stretch x32 OS?
== Recommended changes to step 11 ==
the first command in step #11 should be
  cd ..
This is because the previous step ends with you in qtbase when you need to be in raspi


== Recommended changes to Step #15 ==
== Recommended changes to Step #15 ==
Line 222: Line 54:
(This would have saved me an hour...)
(This would have saved me an hour...)


== Step #15 Problems ==
You may get this result when you run the example app:
  This application failed to start because it could not find or load the Qt plaform plugin "xcb" in "".
  Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, xcb.
  Reinstalling the application may fix this problem
  Aborted
Additional Debugging gives you this result:
  Got keys from plugin meta data ("xcb")
  QFactoryLoader::QFactoryLoader() checking directory path "/home/pi/platforms" ...
  Cannot load library /usr/local/qt5pi/plugins/platforms/libqxcb.so: (/usr/local/qt5pi/plugins/platforms/../../lib/libQt5XcbQpa.so.5: symbol_ZTI18QPlatformClipboard, version Qt_5_PRIVATE_API not defined in file libQt5Gui.so.5 with link time reference)
  QLibraryPrivate::loadPlugin failed on "/usr/local/qt5pi/plugins/platforms/libqxcb.so" : "Cannot load library /usr/local/qt5pi/plugins/platforms/libqxcb.so: (/usr/local/qt5pi/plugins/platforms/../../lib/libQt5XcbQpa.so.5: symbol _ZTI18QPlatformClipboard, version Qt_5_PRIVATE_API not defined in file libQt5Gui.so.5 with link time reference)"
  This application failed to start because it could not find or load the Qt platform plugin "xcb" in "".
  Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, xcb.
  Reinstalling the application may fix this problem.
  Aborted
No solution at this time.


== Cross compilation on 64bit machines TIP ==
== Cross compilation on 64bit machines TIP ==
Line 252: Line 61:
   ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-
   ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-


== Never script your Terminal output to a .log file. ==


The title sums it all up. I began scripting the whole Terminal output to my progress.log file. I followed all steps up until the long ./configure command. It always failed while the compiler was searching for "~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++". The error was:
== Recommended changes to Step #4 ==
 
Honestly, `sudo rpi-update` should only be used by Raspbian developers to the firmware or operating system itself; it pulls from the `next` branch which is usually unstable. At times, it will brick your Raspi.


> Info: creating stash file /home/nikilesh/raspi/qtbase/config.tests/.qmake.stash
Please change this to read `sudo apt-get update && sudo apt-get -y upgrade`. This will upgrade the operating system and yes, the firmware as well. It will pull from the stable `master` branch as expected.
> Project ERROR: Compiler ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++ not found. Check the value of CROSS_COMPILE -device-option
>Note: Also available for Linux: linux-clang linux-icc


>ERROR: Cannot compile a minimal program. The toolchain or QMakeSpec is broken.
==  error: undefined reference to `__cxa_throw_bad_array_new_length@CXXABI_1.3.8' ==


I lost more than four hours finding out the solution, creating a totally separate folder, re-cloning tools from raspberrypi's git, re-cloning qtbase and then again failing thrice with the ./configure command. This was mildly infuriating.
When try to build QT Creator app got an error:
A brainwave occurred that made me exit from scripting my .log file. I executed the command simply in plain Terminal and succeeded in it. I recommend everyone who are keen to log their cross-compilation progress to use the "tee" command.
raspi/sysroot/usr/lib/arm-linux-gnueabihf/libicui18n.so.57:-1: error: undefined reference to `__cxa_throw_bad_array_new_length@CXXABI_1.3.8'


For example, <your command> | tee <file destination>
after some exploration add following line to .pro file:
QMAKE_LFLAGS += -fuse-ld=gold


> $ ./configure -release -opengl es2 -no-openssl -no-dbus -no-use-gold-linker -device linux-rasp-pi3-g++ -device-option CROSS_COMPILE=~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf- -sysroot ~/raspi/sysroot -opensource -confirm-license -make libs -prefix /usr/local/qt5pi -extprefix ~/raspi/qt5pi -hostprefix ~/raspi/qt5 | tee ~/config_progress.log
Now its ok.


== Recommended changes to Step #4 ==
== Add section about changed library names ==


Honestly, `sudo rpi-update` should only be used by Raspbian developers to the firmware or operating system itself; it pulls from the `next` branch which is usually unstable. At times, it will brick your Raspi.
See [https://mechatronicsblog.com/cross-compile-and-deploy-qt-5-12-for-raspberry-pi/ this] (part 6). I cite:
"In new Raspbian stretch versions, EGL libraries have different names than those assumed in Qt configuration files, so edit the ./qtbase/mkspecs/devices/linux-rasp-pi*-g++/qmake.conf file and substitute all references to -lEGL and -LGLESv2 for -lbrcmEGL and -lbrcmGLESv2, respectively." (linux-rasp-pi*-g++ refers to the board you're using).


Please change this to read `sudo apt-get update && sudo apt-get -y upgrade`. This will upgrade the operating system and yes, the firmware as well. It will pull from the stable `master` branch as expected.
== Broken 'link' in Step 5 (part 2) ==
The qt4-x11 library has depreciated and is no longer available.

Latest revision as of 03:06, 9 August 2020

Asking Questions

Please post questions about building Qt for Raspberry Pi in the Qt forums. This talk page can be used to talk about improving the article.

small fix to the relativelink fixing script

The script relinks also systemd files pointing to /dev/null. Although this does not break anything currently, here is a fix Copy the following and paste to shell in the directory where the sysroot-relativelinks.py is

patch <<'EOF'
*** sysroot-relativelinks.py~	Fri Apr 28 09:50:57 2017
--- sysroot-relativelinks.py	Fri Apr 28 10:56:27 2017
***************
*** 18,23 ****
--- 18,25 ----
          return
      if link.startswith(topdir):
          return
+     if link.startswith("/dev/"):
+         return
      #print("Replacing %s with %s for %s" % (link, topdir+link, filep))
      print("Replacing %s with %s for %s" % (link, os.path.relpath(topdir+link, subdir), filep))
      os.unlink(filep)
EOF

Ansible Roles/Playbooks Based on this Article

I used the instructions here to make Ansible playbooks that perform most of the same steps. The playbooks can set up a Pi, set up a development computer, and then deploy Qt to the Pi. Repo is https://bitbucket.org/johnwoltman/build_qt_for_pi_with_ansible

Minor improvement to step 8

You can combine all 5 commands into one like this:

rsync -avzR pi@raspberrypi.local:/lib :/usr/include :/usr/lib :/opt/vc sysroot

Note that -R preserves the path names and that rsync creates the ./sysroot directory for us.

Hi I have Ubuntu 16.04 x64 and Qt Creator 5.10.1 x64 witch version of qt base should I choose? for compile on raspberry pi 3 with Raspbian stretch x32 OS?

Recommended changes to Step #15

Just including the line:

  ./qopenglwidget

So that way beginners (like me) know what to do to get it running.

Suggestion of changes to step 14

Make sure you're in "/home/pi" aka "~" when you run these commands:

(This would have saved me an hour...)


Cross compilation on 64bit machines TIP

Hi. When You try to build QT on 64 bit PC without i386 libraries, use:

  ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-


Recommended changes to Step #4

Honestly, `sudo rpi-update` should only be used by Raspbian developers to the firmware or operating system itself; it pulls from the `next` branch which is usually unstable. At times, it will brick your Raspi.

Please change this to read `sudo apt-get update && sudo apt-get -y upgrade`. This will upgrade the operating system and yes, the firmware as well. It will pull from the stable `master` branch as expected.

error: undefined reference to `__cxa_throw_bad_array_new_length@CXXABI_1.3.8'

When try to build QT Creator app got an error: raspi/sysroot/usr/lib/arm-linux-gnueabihf/libicui18n.so.57:-1: error: undefined reference to `__cxa_throw_bad_array_new_length@CXXABI_1.3.8'

after some exploration add following line to .pro file: QMAKE_LFLAGS += -fuse-ld=gold

Now its ok.

Add section about changed library names

See this (part 6). I cite: "In new Raspbian stretch versions, EGL libraries have different names than those assumed in Qt configuration files, so edit the ./qtbase/mkspecs/devices/linux-rasp-pi*-g++/qmake.conf file and substitute all references to -lEGL and -LGLESv2 for -lbrcmEGL and -lbrcmGLESv2, respectively." (linux-rasp-pi*-g++ refers to the board you're using).

Broken 'link' in Step 5 (part 2)

The qt4-x11 library has depreciated and is no longer available.