Shiner: Difference between revisions

From Qt Wiki
Jump to navigation Jump to search
No edit summary
(No difference)

Revision as of 17:44, 14 January 2015

Shiner

Architecture ARM
CPU ARM Cortex A9
RAM 512 MB
GPU PowerVR 3D GPU
Hardware acceleration OpenGL ES 2.0
Qt 4.8 (eglnullws/QWS) Supported, with OpenGL
Qt 5.0 (eglfs/QPA) Supported, with OpenGL

Device Information

The Shiner is made by Trident Microsystems [tridentmicro.com].

  1. “The Trident PNX8472/ PNX8473 combines a unique array of worldclass, high-performance technologies for mainstream high-definition (HD) set-top boxes (STBs) on broadband networks and for online video on demand (VOD) on home networks.”

Software

  1. Trident SDK 3.3.0

Hardware

  1. Chip Type :- Shiner
  2. Chip Rev :- M1
  3. Template :- 0A

Assumptions

  1. Trident reference software SDK 3.3.0 is configured with “source ./pnx8400_a9_env.sh sage_512M retail ipstb_license_free pnx8473 singlehd_512M.ini”
  2. Trident reference software SDK 3.3.0 is built on Host PC as conveyed in Trident’s documentation given by Trident’s Field Application Engineer.
  3. Can run Trident’s simple test apps on reference board to test OpenGL ES 2.0 and media playback.
  4. “Trident SDK 3.3.0” is installed at <Trident SDK 3.3.0 installation path>
  5. EGL and OpenGL ES 2.0 headers are located at <path to EGL headers>
  6. EGL and OpenGL ES 2.0 libs are located at <path to EGL libs>

Qt 4.8.0 EGLNullWS/QWS

Getting Qt 4.8.0 with Trident’s mkspecs

  1. Extract qt-everywhere-opensource-src-4.8.0.tar.gz
  2. Create folder named “linux-trident-sage-g++” in “qt-everywhere-opensource-src-4.8.0/mkspecs/qws”
  3. Get following files in “qt-everywhere-opensource-src-4.8.0/mkspecs/qws/linux-trident-sage-g++”
    1. https://gitorious.org/qt-platform-mkspecs/qt-platform-mkspecs/blobs/master/4.8/qws/linux-trident-sage-g++/qmake.conf
    2. https://gitorious.org/qt-platform-mkspecs/qt-platform-mkspecs/blobs/master/4.8/qws/linux-trident-sage-g++/qplatformdefs.h

Compiling Qt 4.8.0 <

Set the development environment variables using following commands Configure, build and install Qt 4.8.0 as After the build succeeds set following environment variables before building any Qt Apps,

  1. QTDIR=/path/to/installation/directory/qt-everywhere-opensource-src-4.8.0-qws/
  2. PATH=/path/to/installation/directory/qt-everywhere-opensource-src-4.8.0-qws/bin/

Before executing any Qt applications on target copy “/path/to/installation/directory/qt-everywhere-opensource-src-4.8.0-qws” from host on target at “/path/to/installation/directory/qt-everywhere-opensource-src-4.8.0-qws” on target file system

Qt 5.0 EGLFS/QPA

Only QtBase module is tested.

Compiling Qt 5.0

One need to pass following “device-option“s

  1. SDK_BUILDTREE=<Trident SDK 3.3.0 installation path>/SRC
  2. CROSS_COMPILE=<Trident SDK 3.3.0 installation path>/SRC/open_source_archive/linux/toolchains/gcc-4.5.2_uclibc/usr/bin/arm-linux-uclibcgnueabi-
  3. SDK_BUILDSPEC=<build specification for given board>
  4. SDK_INCDIR_EGL_OPENGL_ES2=<path to EGL headers>
  5. SDK_LIBDIR_EGL_OPENGL_ES2=<path to EGL libs>

Configure, build and install Qt 5.0 as After the build succeeds set following environment variables before building any Qt Apps,

  1. QTDIR=/path/to/installation/directory/qt-gitorious-opensource-src-5.0/
  2. PATH=/path/to/installation/directory/qt-gitorious-opensource-src-5.0/bin/

Before executing any Qt applications on target copy “/path/to/installation/directory/qt-gitorious-opensource-src-5.0” from host on target at “/path/to/installation/directory/qt-gitorious-opensource-src-5.0” on target file system

Categories: