Build Qt for Tizen Developer Device: Difference between revisions

From Qt Wiki
Jump to navigation Jump to search
(Add "cleanup" tag)
(Decode HTML entity names)
Line 19: Line 19:
# Run "sbs -e" and then run "./configure -opensource -confirm-license" inside the extracted folder
# Run "sbs -e" and then run "./configure -opensource -confirm-license" inside the extracted folder
# Run: make
# Run: make
# Run: mkdir tmp && INSTALL_ROOT=$(pwd)/tmp/ make install
# Run: mkdir tmp && INSTALL_ROOT=$(pwd)/tmp/ make install
# Pack up everything: cd tmp && tar czvf ../qt_tizen.tgz *
# Pack up everything: cd tmp && tar czvf ../qt_tizen.tgz *
# Copy it to the device: sdb push ../qt_tizen.tgz /root/
# Copy it to the device: sdb push ../qt_tizen.tgz /root/
# Get a shell and extract it: sdb shell && tar xzvf /root/qt_tizen.tgz -C /
# Get a shell and extract it: sdb shell && tar xzvf /root/qt_tizen.tgz -C /


After that, you should be able to run it using /usr/local/Trolltech/Qt-4.8.1/bin/qtdemo
After that, you should be able to run it using /usr/local/Trolltech/Qt-4.8.1/bin/qtdemo


== References ==
== References ==

Revision as of 16:55, 12 March 2015

This article may require cleanup to meet the Qt Wiki's quality standards. Reason: Auto-imported from ExpressionEngine.
Please improve this article if you can. Remove the {{cleanup}} tag and add this page to Updated pages list after it's clean.

[toc align_right="yes" depth="2"]

How to build Qt 4.8.1 for Tizen 1.0 Larkspur on RD-210

Overview

This article demonstrates how to build Qt 4.8.1 in Scratchbox2 ("SBS") and copy the files over to Tizen 1.0 Larkspur Ref.Device-210 (RD-210) for testing. Be aware that this does not include any source code changes, so the build might still need lots of work (and porting) for it to become fully usable.

How-to

  1. Install SBS: https://source.tizen.org/platform/development-sbs
  2. Install the Tizen SDK: https://developer.tizen.org/sdk (alternatively, get "sdb" through some other means)
  3. Get the Qt sources: http://releases.qt.io/qt4/source/qt-everywhere-opensource-src-4.8.1.tar.gz
  4. Unpack the sources somewhere: tar xzvf qt-everywhere-opensource-src-4.8.1.tar.gz
  5. Run "sbs -e" and then run "./configure -opensource -confirm-license" inside the extracted folder
  6. Run: make
  7. Run: mkdir tmp && INSTALL_ROOT=$(pwd)/tmp/ make install
  8. Pack up everything: cd tmp && tar czvf ../qt_tizen.tgz *
  9. Copy it to the device: sdb push ../qt_tizen.tgz /root/
  10. Get a shell and extract it: sdb shell && tar xzvf /root/qt_tizen.tgz -C /

After that, you should be able to run it using /usr/local/Trolltech/Qt-4.8.1/bin/qtdemo

References

Retrieved from "https://wiki.qt.io/index.php?title=Build_Qt_for_Tizen_Developer_Device&oldid=13149"