OpenHarmony Introduction

OpenHarmony is an open-source project incubated and operated by the OpenAtom Foundation, with the goal of building a framework and platform for intelligent terminal device operating systems. It aims to cater to the era of full-scenario, full-connectivity, and full-intelligence, and promote the prosperous development of the Internet of Everything industry.

OpenHarmony Open source project

HUAWEI DevEco Studio Installation

If you want to develop Qt for OpenHarmony applications, apart from using Qt Creator, you also need to rely on DevEco Studio.

https://developer.huawei.com/consumer/cn/deveco-studio/

In general, there is no need to configure the sdk version used by DevEco Studio because DevEco Studio comes with one sdk by default.

However, if the included sdk does not meet your needs, you can set the sdk version you want to use by using the following method:

For OpenHarmony 5, you want to install API Version 12 SDK:

To avoid any issues caused by the development environment, please first confirm if you can use DevEco Studio to develop Arkts applications.

Gerrit Introduction

The Qt source code is hosted on Gerrit for code review and version control. All needed information about how to work with Gerrit is written on the following pages:

How to get Qt for OpenHarmony source code

Access and login to: https://codereview.qt-project.org.
Click on the "Settings" in the upper right corner to open the settings page.
Click on "Settings" -> "HTTP Credentials" -> "GENERATE NEW PASSWORD" to generate a new password. Save the password for later use with "git clone".
Access https://codereview.qt-project.org/admin/repos/qt/tqtc-qt5, and copy the git repository address.
cd tqtc-qt5
git checkout tqtc/harmonyos-5.12.12 or git checkout tqtc/harmonyos-5.16.16
git submodule update --init --recursive

Building Qt Library for Qt for OpenHarmony in macOS

Prepare for third-party dependencies

Following instruction has been prepared based on macOS Sonoma 14.0. Does not represent a minimum dependency condition.

git version 2.39.3
python 3.12.0

System environments

Open ~/.zshrc or ~/.bashrc and add the following:

local HARMONY_OS_API_VER=12
local HOME_LIBRARY=${HOME}/Library
export OHOS_SDK_ROOT=${HOME_LIBRARY}/OpenHarmony/Sdk
export HOS_SDK_HOME=${HOME_LIBRARY}/OpenHarmony/Sdk
export OHOS_SDK_12=${HOS_SDK_HOME}/${HARMONY_OS_API_VER}
export NATIVE_OHOS_SDK=${OHOS_SDK_12}/native

Building Qt sources

You can use below script to build Qt for arm64-v8a target.

Please fill-in path to your local source directory.

#!/bin/sh

# Target architecure
ARCH="arm64-v8a"

# Source and build directories
QT5_ROOT_DIR=<ENTER PATH TO YOUR qt/qt5 DIRECORY>
QT5_BUILD_DIR="$QT5_ROOT_DIR/build_${ARCH}"

# Prepare build directory
mkdir "$QT5_BUILD_DIR"
cd "$QT5_BUILD_DIR"

../configure \
    -v \
    -xplatform ohos-clang \
    -prefix ${NATIVE_OHOS_SDK}/opt/Qt/5.12.12/ohos-${ARCH}-clang/ \
    -opensource \
    -confirm-license \
    -release \
    -no-use-gold-linker \
    -no-gcc-sysroot \
    -ohos-arch ${ARCH} \
    -opengles3 \
    -skip qt3d -skip qtactiveqt -skip qtandroidextras -skip qtcanvas3d -skip qtcharts \
    -skip qtconnectivity -skip qtdatavis3d -skip qtdoc -skip qtdocgallery -skip qtfeedback \
    -skip qtgamepad -skip qtgraphicaleffects -skip qtlocation -skip qtmacextras -skip qtnetworkauth \
    -skip qtpim -skip qtpurchasing -skip qtqa -skip qtremoteobjects -skip qtrepotools \
    -skip qtscript -skip qtscxml -skip qtsensors -skip qtserialbus -skip qtserialport \
    -skip qtspeech -skip qtsystems -skip qttools -skip qttranslations -skip qtvirtualkeyboard \
    -skip qtwayland -skip qtwebchannel -skip qtwebengine -skip qtwebglplugin -skip qtwebsockets \
    -skip qtwebview -skip qtwinextras -skip qtx11extras -skip qtxmlpatterns -skip doc \
    -no-dbus \
    -c++std c++14 \
    -make tests

then,

make -j16
make install

Building Qt Application for OpenHarmony in macOS

Creating development kit for OpenHarmony in Qt Creator

Go to Preferences → Kits → Qt Versions. Click the button Add….

Configuring Qt Version

Select the qmake file generated by compiling the Qt for OpenHarmony source code:

Configuring Compilers

Go to the Compilers tab. Click on the button Add, then select Custom → C.

Set:

Name: OHOS Clang

Compiler path: /path/to/OpenHarmony/Sdk/12/native/llvm/bin/clang

Make Path: /usr/bin/make

ABI: arm - linux - generic - elf - 64bit

Follow the above steps for the C++ compiler. However, this time, make sure to set Name to OHOS Clang++ and in Compiler path select the

clang++ instead.

Configuring Kits

Go to Kits tab.

Click the Add button.

Setting required environment variables in Qt Creator

Go Preferences → Environment → System and click the Change… button in Environment section.

Add a new environment variable by adding a line:

NATIVE_OHOS_SDK=/path/to/OpenHarmony/Sdk/12/native

Building Qt Library for OpenHarmony in Windows

Preparing the Build Environment

Clone qt5 repository from Gerrit using --recursive parameter to get also all submodules,Qt for OpenHarmony#How to get Qt for OpenHarmony source code:

Install DevEco Studio and download the OpenHarmony/native package from its SDK manager,Qt for OpenHarmony#HUAWEI DevEco Studio Installation.

Download MinGW toolchain

For example llvm-mingw-20230919-ucrt-x86_64.zip from Releases · mstorsjo/llvm-mingw Unzip and copy folder for example to d:\

Install Perl

Strawberry Perl for Windows

Add MinGW and Perl paths to PATH environment variable as shown below:

Open command prompt (cmd.exe was used) and set following environment variables：

REM set NATIVE_OHOS_SDK 
SET NATIVE_OHOS_SDK=D:\oh\DevEcoStudio\sdk\HarmonyOS-NEXT-DB6\openharmony\native

REM set OHOS_SDK_SYSROOT 
SET OHOS_SDK_SYSROOT=%NATIVE_OHOS_SDK%\sysroot

REM set LLVM_INSTALL_DIR 
SET LLVM_INSTALL_DIR=%NATIVE_OHOS_SDK%\llvm

Building

With the same command prompt locate to your qt5 repository directory and create build directory parallel to that (Do NOT make the build

directory a subdirectory of the qt5 directory). Then Go to build directory, define a variable with skipped modules and run configure

command:

REM set QT_SKIPS 
SET QT_SKIPS=-skip qt3d -skip qtactiveqt -skip qtandroidextras -skip qtcanvas3d -skip qtcharts -skip qtconnectivity -skip qtdatavis3d -skip qtdoc -skip qtdocgallery -skip qtfeedback -skip qtgamepad -skip qtgraphicaleffects -skip qtlocation -skip qtmacextras -skip qtnetworkauth -skip qtpim -skip qtpurchasing -skip qtqa -skip qtremoteobjects -skip qtrepotools -skip qtscript -skip qtscxml -skip qtsensors -skip qtserialbus -skip qtserialport -skip qtspeech -skip qtsystems -skip qttools -skip qttranslations -skip qtvirtualkeyboard -skip qtwayland -skip qtwebchannel -skip qtwebengine -skip qtwebglplugin -skip qtwebsockets -skip qtwebview -skip qtwinextras -skip qtx11extras -skip qtxmlpatterns -no-dbus -skip doc

REM  configure command
call ..\tqtc-qt5\configure.bat -v -xplatform ohos-clang -device-option CROSS_COMPILE=%LLVM_INSTALL_DIR%\bin -prefix c:\Qt\qt-5.12.12-ohos -opensource -confirm-license -debug -no-use-gold-linker %QT_SKIPS% -nomake tests -nomake examples -no-gcc-sysroot -opengles3 -c++std c++14 -ohos-arch arm64-v8a

After configure is finished successfully you can start building with mingw32-make:

REM build mingw32-make
mingw32-make -j8

After successful build you can start installing with following command:

mingw32-make install

Building Qt Application for OpenHarmony in Windows

The following parts of the instruction, that you have installed DevEco studio, OpenHarmony toolchains,already have the device of HarmonyOS.

Be aware that Qt5 build + multiple options, currently Arch is arm64-v8a.

Preparing Qt Creator as a Qt IDE

Download Qt Creator，create a kit for OpenHarmony manually

Creating development kit for OpenHarmony in Qt Creator

Go to Edit →Preferences→Kits

Configuring Qt Version

Go to Qt Version tab. Click the button Add…

Go to the folder in which Qt 5.12.12 for OHOS was installed (it should be installed in a path specified with PREFIX), then go to the bin folder, and select the qmake application and click Open. For example, I compiled the Qt source code with PREFIX=C:\Qt\qt-5.12.12-ohos, so qmake will be in C:\Qt\qt-5.12.12-ohos\bin\qmake. Set Name to Qt %{Qt:Version} for OHOS. At this point, there should be information, that there are no compilers that can produce code for this Qt version.

Configuring Compilers

Go to the Compilers tab. Click on the button Add, then select Custom→C

Set Name to OHOS Clang.

Assuming you have followed the instruction to build Qt 5.12.12 for OHOS from sources, you should have llvm-mingw already installed. If not, please follow the MinGW toolchain installation stepQt for OpenHarmony#Preparing the Build Environment

Set the Make path to mingw32-make.exe executable shipped with your MinGW toolchain. It should be located in <path-to-MinGW-toolchain>\bin\mingw32-make.exe. Do not forget to substitute <path-to-MinGW-toolchain>with the actual path.

Change the ABI to arm - linux - generic - elf - 64bit

Follow the above steps for the c++ compiler. However, this time, make sure to set Name to OHOS Clang++ and in Compiler path select the clang++.exe instead.

Configuring Kits

Go to Qt kits tab. Click the button Add…

Set Name to OHOS Clang

Set Sysroot to D:\oh\DevEcoStudio\sdk\HarmonyOS-NEXT-DB6\openharmony\native\sysroot. In Compiler section, select previously configured compilers for C(OHOS Clang) and C++(OHOS Clang++).

In Qt version select previously configured Qt 5.12.12 for OHOS.

Set Qt mkspec to ohos-clang.

The complete Kit should look like this:

Setting required environment variables in Qt Creator

Go to Edit→Preferences→Environment→System and click the Change…button in Environment section.

Add a new environment variable by adding a line NATIVE_OHOS_SDK=D:\oh\DevEcoStudio\sdk\HarmonyOS-NEXT-DB6\openharmony\native

Obtaining a template DevEco project

Contact us to obtain a template DevEco project for building final OpenHarmony Qt applications. This will be used to run the Qt application on the OpenHarmony device.

Put the template DevEco project into a known location. Let’s call it <deveco-project>

Go to folder<deveco-project>\entry and create a folder<deveco-project>\entry\libs\arm64-v8a

Compiling a simple Qt project

To simplify this instruction, we will not create an application from scratch, instead we will use an existing example from widget.

Go to your Documents folder and create a new folder called qt_creator_projects. Then go to<qt5-root>\examples\widgets\widgets folder in explorer and copy the whole calculator folder into the qt_creator_projects folder

Then, in QtCreator, click on File→Open File or Project, then go to the qt_creator_projects\calculator and select the calculator.profile.

In Configure Project tab select the OHOS Clang kit and click the Configure Project button.

Trigger the compilation by clicking on Build→Build Project “calculator”, or use shortcut: Ctrl+B. The project should compile without errors.

You should be able to find the compiled libcalculator.so file inside the Documents\qt_creators_projects\build-calculator-OHOS_Clang-Debug folder.

Run the Qt for OpenHamony application to the hardware

Building the final OHOS application

Copy the libcalculator.so file from the previous step into your<deveco-project>\entry\libs\arm64-v8a folder

Then copy the needed library from <qt-install-path>\lib\ to <deveco-project>\entry\lib\arm64-v8a\

For example, for libQt5Widgets.so library it will be (Powershell):

Copy-Item "<qt-install-path>\lib\libQt5Widgets.so" -Destination "<deveco-project>\entry\libs\arm64-v8a\"

Similarly, you can find all dependencies of the OHOS qpa plugin, to make sure, you have all necessary libraries.

Modifying the starting point in ets part

Once all libraries are copied, we can modify the eTS source code,

Open the <deveco-project> in DevEco:

Open file <deveco-project>\entry\src\main\ets\qabilitystage\QAbilitystage.ts. Change the qtApplicationName variable to the name of our library( libcalculator.so ):

Build and run the application

Make sure the device is connected. Once it is connected, it should be visible in DevEco Studio

Then adding the signing configs,open file--project structure--signing configs,check all the items,and click the OK.

Once the device is selected in DevEco Studio,you can build and run the application directly:

After BUILD SUCCESSFUL, you can see the the application is running on the target device.

Qt for OpenHarmony

Contents

OpenHarmony Introduction

HUAWEI DevEco Studio Installation

Gerrit Introduction

How to get Qt for OpenHarmony source code

Building Qt Library for Qt for OpenHarmony in macOS

Prepare for third-party dependencies

System environments

Building Qt sources

Building Qt Application for OpenHarmony in macOS

Creating development kit for OpenHarmony in Qt Creator

Configuring Qt Version

Configuring Compilers

Configuring Kits

Setting required environment variables in Qt Creator

Building Qt Library for OpenHarmony in Windows

Preparing the Build Environment

Building

Building Qt Application for OpenHarmony in Windows

Preparing Qt Creator as a Qt IDE

Creating development kit for OpenHarmony in Qt Creator

Configuring Qt Version

Configuring Compilers

Configuring Kits

Setting required environment variables in Qt Creator

Obtaining a template DevEco project

Compiling a simple Qt project

Run the Qt for OpenHamony application to the hardware

Building the final OHOS application

Modifying the starting point in ets part

Build and run the application

Navigation menu

Qt for OpenHarmony

OpenHarmony Introduction

HUAWEI DevEco Studio Installation

Gerrit Introduction

How to get Qt for OpenHarmony source code

Building Qt Library for Qt for OpenHarmony in macOS

Prepare for third-party dependencies

System environments

Building Qt sources

Building Qt Application for OpenHarmony in macOS

Creating development kit for OpenHarmony in Qt Creator

Configuring Qt Version

Configuring Compilers

Configuring Kits

Setting required environment variables in Qt Creator

Building Qt Library for OpenHarmony in Windows

Preparing the Build Environment

Building

Building Qt Application for OpenHarmony in Windows

Preparing Qt Creator as a Qt IDE

Creating development kit for OpenHarmony in Qt Creator

Configuring Qt Version

Configuring Compilers

Configuring Kits

Setting required environment variables in Qt Creator

Obtaining a template DevEco project

Compiling a simple Qt project

Run the Qt for OpenHamony application to the hardware

Building the final OHOS application

Modifying the starting point in ets part

Build and run the application

Navigation menu

Search