Broadcom97425/BCM7425-Qt4dot8-DFB-QWS: Difference between revisions

From Qt Wiki
Jump to navigation Jump to search
No edit summary
m (Wieland moved page BCM7425-Qt4dot8-DFB-QWS to Broadcom97425/BCM7425-Qt4dot8-DFB-QWS: Other pages around this topic follow this naming convention)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Cleanup | reason=Auto-imported from ExpressionEngine.}}
[[Category:Devices]]
[[Category:Devices]]


Line 12: Line 14:
== Qt 4.8 DirectFB / QWS ==
== Qt 4.8 DirectFB / QWS ==


# Obtain qt-4.8.0 release from "Qt Download site":http://get.qt.nokia.com/qt/source/qt-everywhere-opensource-src-4.8.0.tar.gz and extract it in a working folder
# Obtain qt-4.8.0 release from [http://get.qt.nokia.com/qt/source/qt-everywhere-opensource-src-4.8.0.tar.gz Qt Download site] and extract it in a working folder
# Obtain 7425 specific files from "qt-platform-mkspecs git":http://gitorious.org/qt-platform-mkspecs (look for folder "4.8")
# Obtain 7425 specific files from [http://gitorious.org/qt-platform-mkspecs qt-platform-mkspecs git] (look for folder "4.8")
# Copy folder named "linux-7425dfb-mipsel-uclibc-g+''" to <qt-4.8.0-sources>/mkspecs/qws
# Copy folder named "linux-7425dfb-mipsel-uclibc-g+''" to <qt-4.8.0-sources>/mkspecs/qws
# Set following environment variables in the shell before configuring/building Qt,
# Set following environment variables in the shell before configuring/building Qt,
Line 31: Line 33:
</code>$ make install</code>
</code>$ make install</code>


h2. Building Qt apps
== Building Qt apps ==
 
# After the Qt build succeeds set following environment variables on host before building any Qt Apps for the above build,
# After the Qt build succeeds set following environment variables on host before building any Qt Apps for the above build,
  *QTDIR=/usr/local/qt-installs/qt480ga-mdfb-rel
  *QTDIR=/usr/local/qt-installs/qt480ga-mdfb-rel
Line 46: Line 47:
</code> $ make</code>
</code> $ make</code>


h2. Running Qt apps on target
== Running Qt apps on target ==
 
# Ensure that folder "qt-installs/qt480ga-mdfb-rel" is copied on target file system at "/usr/local"
# Ensure that folder "qt-installs/qt480ga-mdfb-rel" is copied on target file system at "/usr/local"
  Note- after copying, the path should appear as "/usr/local/qt-installs/qt480ga-mdfb-rel"
  Note- after copying, the path should appear as "/usr/local/qt-installs/qt480ga-mdfb-rel"

Latest revision as of 17:16, 22 May 2015

This article may require cleanup to meet the Qt Wiki's quality standards. Reason: Auto-imported from ExpressionEngine.
Please improve this article if you can. Remove the {{cleanup}} tag and add this page to Updated pages list after it's clean.

BCM 7425 - Qt 4.8 - DirectFB /QWS

Building AppLibs/RefSW for Qt

  1. Locate document named "BroadcomReferencePlatformSetup.pdf" (Usually this will be inside a tar ball named on the lines of refsw_release_<chip-name><date>.tgz)
  2. Follow the instructions in "BroadcomReferencePlatformSetup.pdf" to setup the Linux build machine
  3. Locate document named "AppLibsInstallationBuildGuide.pdf" (Usually this will be inside a tar ball named on the lines of applibs_release<date>.tgz)
  4. Follow the instructions in "AppLibsInstallationBuildGuide.pdf" to build Applibs

Qt 4.8 DirectFB / QWS

  1. Obtain qt-4.8.0 release from Qt Download site and extract it in a working folder
  2. Obtain 7425 specific files from qt-platform-mkspecs git (look for folder "4.8")
  3. Copy folder named "linux-7425dfb-mipsel-uclibc-g+" to <qt-4.8.0-sources>/mkspecs/qws
  4. Set following environment variables in the shell before configuring/building Qt,
BCM_APPLIBS_PATH=<path-till-Applibs-folder>/AppLibs
BCM_NEXUS_PATH=<path-till-Applibs-folder>/nexus
BCM_TARGET_LIBDIR=<path-till-nfsrootfs-base-folder>/romfs/lib
DEBUG=n

for example,

$ export BCM_APPLIBS_PATH=/home/qtnokia/WorkDir/97425-P1/stb-rs_p2-al_p2dot1/AppLibs
$ export BCM_NEXUS_PATH=/home/qtnokia/WorkDir/97425-P1/stb-rs_p2-al_p2dot1/nexus
$ export BCM_TARGET_LIBDIR=/opt/nfsroot_uclibc/romfs/lib
  1. Configure Qt as,
$ configure -embedded mips -xplatform qws/linux-7425dfb-mipsel-uclibc-g''+ -depths 16,24,32 -no-largefile -no-accessibility -opensource -verbose -system-zlib -system-libpng -system-libjpeg -system-freetype -fast -qt-gfx-directfb -qt-gfx-vnc -qt-kbd-linuxinput -qt-mouse-linuxinput -webkit -declarative -multimedia -confirm-license -release -make libs -xmlpatterns -exceptions -no-qt3support -no-xvideo -prefix /usr/local/qt-installs/qt480ga-mdfb-rel
  1. Build Qt as,
$ make<code>
# Install Qt on host as,

$ make install

Building Qt apps

  1. After the Qt build succeeds set following environment variables on host before building any Qt Apps for the above build,
*QTDIR=/usr/local/qt-installs/qt480ga-mdfb-rel
*PATH=/usr/local/qt-installs/qt480ga-mdfb-rel/bin:$PATH
  1. Ensure that following environment variables in the shell are set,
BCM_APPLIBS_PATH=<path-till-Applibs-folder>/AppLibs
BCM_NEXUS_PATH=<path-till-Applibs-folder>/nexus
BCM_TARGET_LIBDIR=<path-till-nfsrootfs-base-folder>/romfs/lib
DEBUG=n
  1. Invoke qmake on the applications .pro file
$ qmake <application>.pro<code>
# Build the application sources as,

$ make

Running Qt apps on target

  1. Ensure that folder "qt-installs/qt480ga-mdfb-rel" is copied on target file system at "/usr/local"
Note- after copying, the path should appear as "/usr/local/qt-installs/qt480ga-mdfb-rel"
  1. Copy the application binary and other required resource files on target file-system, at say "/root"
  2. On target, goto directory containing directfb startup script as,
# cd /usr/local/bin/directfb/1.4<code>
# Install board specific modules and create device nodes by running "rundfb.sh" as,

# ./rundfb.sh install

  1. Launch application using same rundfb.sh script as,