Build Qt for Tizen Developer Device

From Qt Wiki
Revision as of 10:46, 25 February 2015 by Maintenance script (talk | contribs)
Jump to navigation Jump to search


[toc align_right="yes" depth="2"]

How to build Qt 4.8.1 for Tizen 1.0 Larkspur on RD-210

Overview

This article demonstrates how to build Qt 4.8.1 in Scratchbox2 ("SBS") and copy the files over to Tizen 1.0 Larkspur Ref.Device-210 (RD-210) for testing. Be aware that this does not include any source code changes, so the build might still need lots of work (and porting) for it to become fully usable.

How-to

  1. Install SBS: https://source.tizen.org/platform/development-sbs
  2. Install the Tizen SDK: https://developer.tizen.org/sdk (alternatively, get "sdb" through some other means)
  3. Get the Qt sources: http://releases.qt.io/qt4/source/qt-everywhere-opensource-src-4.8.1.tar.gz
  4. Unpack the sources somewhere: tar xzvf qt-everywhere-opensource-src-4.8.1.tar.gz
  5. Run "sbs -e" and then run "./configure -opensource -confirm-license" inside the extracted folder
  6. Run: make
  7. Run: mkdir tmp && INSTALL_ROOT=$(pwd)/tmp/ make install
  8. Pack up everything: cd tmp && tar czvf ../qt_tizen.tgz *
  9. Copy it to the device: sdb push ../qt_tizen.tgz /root/
  10. Get a shell and extract it: sdb shell && tar xzvf /root/qt_tizen.tgz -C /

After that, you should be able to run it using /usr/local/Trolltech/Qt-4.8.1/bin/qtdemo

References