Compiling OpenSSL with MinGW

From Qt Wiki
Revision as of 10:42, 23 February 2015 by Maintenance script (talk | contribs)
Jump to navigation Jump to search


Compiling OpenSSL with MinGW or MinGW-w64

Qt 5 / QtWebkit can make use of OpenSSL, which MinGW distributions do not ship.

Pre-built packages

The "Win32OpenSSL project":http://slproweb.com/products/Win32OpenSSL.html provides pre-compiled libraries for both 32 and 64 bit. However, these depend on the Microsoft Visual C++ 2008 runtime being installed.

Inside MSYS2 shell, pre-built openssl can be obtained from MSYS2 repo, with this command: pacman -S openssl

Compiling on your own

Requirements

  • Either use MSYS, or use MSYS2 :
  • Working MinGW, or MinGW-w64 toolchain:
    • Either get & load MinGW, or, get & load MinGW-w64 toolchains (from their respective project website), or, use "MinGW-w64" toolchains from MSYS2 repo, inside the MSYS2-shell.
    • NOTE: Do not use (or try to avoid using) different type of toolchains for building different sub-components for the same/main project, when targeted for same platform/OS. If you are using MinGW-w64 based toolchains from MSYS2\mingw32 or MSYS2\mingw64, then for main project & all sub-components, use same MSYS2 toolchains. If you are using MinGW toolchain, then for all of your sub-components & main project, use same MinGW toolchain. If you are using MinGW-w64 toolchains from "MinGW-builds", then for all sub-components & main project, use same MinGW-builds toolchains.

How to build

  • Download latest+stable "OpenSSL":https://www.openssl.org/ (You must use HTTPS secure encrypted connection to obtain source file) from https://www.openssl.org/source (e.g. openssl-1.0.1c.tar.gz)
  • Either start MSYS-shell, or start MSYS2-shell:
    • Start a MSYS shell command prompt (C:.0\msys.bat)
    • Or, start MSYS2 shell command prompt (C:2\msys2_shell.bat)
      • See inside this MSYS2 page, how to prepare MSYS2 with build/compile related toolchains, tools & dependencies
  • Extract source tar.gz using MSYS tar or MSYS2 tar (and ignore the symlink warnings)
    • don't use 7zip or other apps, since they fail to set up any symlinks! tar will also complain about symlinks, but compilation will still succeed.
  • Unzip/decompress source:
    <br />&amp;#36; tar xvzf openssl-1.0.1c.tar.gz<br />&amp;#36; cd openssl-1.0.1c<br />
    
  • Check that gcc is in PATH, otherwise add it: change below command to match with your-side directory's exact name & letter-case & location:
    • If using MinGW-builds toolchain (which is usually located outside of MSYS or MSYS2), then execute this in MSYS or in MSYS2:
      <br />&amp;#36; export PATH=&quot;/c/Mingw-builds/bin:&amp;#36;PATH&amp;quot;<br />
      
    • If using MSYS shell, and if you have installed MinGW toolchain into C:32 directory, then execute this:
      <br />&amp;#36; export PATH=&quot;/c/mingw32/bin:&amp;#36;PATH&amp;quot;<br />
      
    • If using MSYS2 shell, execute this, if you are building for 32bit:
      <br />&amp;#36; export PATH=&quot;/c/msys2/mingw32/bin:&amp;#36;PATH&amp;quot;<br />
      
    • If using MSYS2 shell, execute this, if you are building for 64bit:
      <br />&amp;#36; export PATH=&quot;/c/msys2/mingw64/bin:&amp;#36;PATH&amp;quot;<br />
      
  • for MinGW (32 bit) do:
    <br />&amp;#36; ./Configure prefix=&amp;#36;PWD/dist no-idea no-mdc2 no-rc5 shared mingw<br />
    
  • for MinGW-w64 do:
    <br />&amp;#36; ./Configure prefix=&amp;#36;PWD/dist no-idea no-mdc2 no-rc5 shared mingw64<br />
    
  • Compile & install:
    <br />&amp;#36; make depend &amp;&amp; make &amp;&amp; make install<br />
    

Errors

  • If you run into
    <br />perl asm/sha1-x86_64.pl mingw64 &gt; sha1-x86_64.s<br />gcc -I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include -D_WINDLL -DOPENSSL_PIC -DOPENSSL_TH<br />READS -D_MT -DDSO_WIN32 -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE -DOPENSSL_IA<br />32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM <s>DSHA256_ASM</s><br />DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c -o sha1-x86_<br />64.o sha1-x86_64.s<br />sha1-x86_64.s: Assembler messages:<br />sha1-x86_64.s:1824: Warning: end of file not at end of a line; newline inserted<br />sha1-x86_64.s:2183: Error: number of operands mismatch for `rol'<br />make[2]: '''* [sha1-x86_64.o] Error 1<br />make[2]: Leaving directory `/d/dev/tmp/openssl-1.0.1c/crypto/sha'<br />make[1]:'''* [subdirs] Error 1<br />make[1]: Leaving directory `/d/dev/tmp/openssl-1.0.1c/crypto'<br />make: '''* [build_crypto] Error 1<br />
    


check out http://openssl.6102.n7.nabble.com/Compile-error-with-MinGW-w64-td36657.html
* Use perl inside MSYS or inside MSYS2
* or change crypto/perlasm/x86_64-xlate.pl as mentioned in the e-mail thread.

Using it

  • If you are using cmd.exe (Cmd-shell), then: add the bin, include, lib folders to your compilation environment:
    <br />C:gt; set PATH=PATH;C:1.0.1c\dist\bin<br />C:gt; set INCLUDE=INCLUDE;C:1.0.1c\dist\include<br />C:gt; set LIB=LIB;C:1.0.1c\dist\lib<br />
    
  • If you are using MSYS2/MSYS-shell, then: add the bin, include, lib folders to your compilation environment:
    <br />&amp;#36; export PATH=&quot;&amp;#36;PATH:/c/openssl-1.0.1c/dist/bin&amp;quot;<br />&amp;#36; export INCLUDE=&quot;&amp;#36;INCLUDE:/c/openssl-1.0.1c/dist/include&amp;quot;<br />&amp;#36; export LIB=&quot;&amp;#36;LIB:/c/openssl-1.0.1c/dist/lib&amp;quot;<br />
    

When you now run Qt's configure.exe openssl should be detected, and Qt links against the libraries.