Qt for Python/GettingStarted: Difference between revisions

From Qt Wiki
Jump to navigation Jump to search
No edit summary
Line 69: Line 69:
=== Building the Documentation ===                                                   
=== Building the Documentation ===                                                   
                                                                                      
                                                                                      
This is currently unexplored terrain [https://bugreports.qt.io/browse/PYSIDE-363 PYSIDE-363], and works at least somewhat only on Linux.
This is currently possible on Linux and macOS hosts only. Before you build pyside2, ensure that the following requirements are met, to be able to build documentation:
* The sources are in pyside2/doc                                                   
* Install libXML2 and libXSLT before building PySide2 (Ubuntu: apt-get install libxml2-dev libxslt1-dev)
* libXML2 and libXSLT should be present when building PySide2 (Ubuntu: apt-get install libxml2-dev libxslt1-dev)
* Set QT_SRC_DIR with the path to qtbase, if you don't want to build documentation based on the Qt sources under <QT_PKG_ROOT>/<QT_VERSION>/Src/qtbase.
* graphviz + dot should be installed                                               
* Install graphviz (including dot) and sphinx (pip install graphviz sphinx)
* QT_SRC_DIR needs to be set                                                       
 
* sphinx should be installed (pip install sphinx)                                  
Once your pyside2 is built, navigate to the ''*_build/*_release/pyside2'' directory and run: <syntaxhighlight>
* qdoc is used to generate it
make apidoc
</syntaxhighlight>
 
The build first runs qdoc on the Qt sources in $QT_SRC_DIR to generate the webxml files, which are then parsed by shiboken to
generate reStructuredText files. In the final step, sphinx is run on the rst files to generate HTMLs.
 
You could also use the ''docrsts'' make target to generate only the reStructuredText files.


=== Using Qt Creator as a project explorer ===                                       
=== Using Qt Creator as a project explorer ===                                       

Revision as of 11:26, 7 November 2018

Getting Started

You can install PySide2 via PyPi, using Qt-servers or by building the source package yourself.

After cloning the official repository you must follow the instructions for your specific system.

Platform Requirements

  • Python:
    • Python 3.5+ and Python 2.7
      • (Please notice there is a known issue with Python 3.6.0, read more.)
  • Qt:
    • 5.11 is recommended
  • libclang:
    • The libclang library (C-bindings), version 5.0 or higher is required for building starting from the PySide2 5.11 branch onwards (recommended: version 6 for PySide2 5.12).
    • Prebuilt versions of it can be downloaded from download.qt.io.
  • CMake (version >= 3.1 required) :
    • The build system required by for building PySide2.

Pre-built Wheels

Official release wheels of Qt For Python can be installed regularly via pip:

pip install pyside2

Pre-release (snapshot) wheels containing the latest code changes are available at http://download.qt.io/snapshots/ci/pyside/

For example you can install the latest 5.11 snapshot wheel using:

pip install --index-url=http://download.qt.io/snapshots/ci/pyside/5.11/latest/ pyside2 --trusted-host download.qt.io

Building PySide2

The building processes are covered in the platform pages.

setup.py build script

The script setup.py in the top level repository is used to build and install the PySide2 package. It takes a mode argument (build or install) and several options (more options are documented in setup.py itself).· The main options are:

  • --qmake=/path/to/qmake: Path to qmake of the Qt library to be used
  • --cmake=/path/to/cmake: Path to cmake binary
  • --build-tests: Builds tests along with some helper packages
  • --ignore-git: Prevents setup.py from cloning and checking out the git submodules.
  • --debug: Build in Debug mode (some restrictions apply to Windows, see Build considerations)
  • --reuse-build: Rebuilds only modified files
  • --openssl=C:\Dev\qtdev\OpenSSL-Win64\bin: Path to OpenSSL's bindir which contains dlls (Only required for Windows PySide2 packages)
  • --jobs=#: Number of # processes to use when building
  • --standalone: Copies over the Qt libraries (and other library dependencies) into the PySide2 package to make it work on other machines (on Windows all builds are standalone, even without specifying the command line argument).
  • --verbose: Prints all compiler invocations when building the package.

A typical invocation looks like:

python setup.py install --build-tests --jobs=4                                                                                                                       

A successful build can be tested by running an example:

 python examples/widgets/widgets/tetrix.py                                                                                                  

You can search for working examples by typing

 cd sources/examples                                                        
 git grep "PySide2 port"

Running Tests

To perform all the available tests, just execute:

python testrunner.py test  > testlog.txt

Note that to successfully run the tests on Windows you need to point the PATH environment variable to the Qt libdir:

set PATH=E:\Qt\5.11\msvc2015_64\bin;%PATH%

Run only one test(qpainter_test):

ctest -R qpainter_test --verbose

Building the Documentation

This is currently possible on Linux and macOS hosts only. Before you build pyside2, ensure that the following requirements are met, to be able to build documentation:

  • Install libXML2 and libXSLT before building PySide2 (Ubuntu: apt-get install libxml2-dev libxslt1-dev)
  • Set QT_SRC_DIR with the path to qtbase, if you don't want to build documentation based on the Qt sources under <QT_PKG_ROOT>/<QT_VERSION>/Src/qtbase.
  • Install graphviz (including dot) and sphinx (pip install graphviz sphinx)

Once your pyside2 is built, navigate to the *_build/*_release/pyside2 directory and run:

make apidoc

The build first runs qdoc on the Qt sources in $QT_SRC_DIR to generate the webxml files, which are then parsed by shiboken to generate reStructuredText files. In the final step, sphinx is run on the rst files to generate HTMLs.

You could also use the docrsts make target to generate only the reStructuredText files.

Using Qt Creator as a project explorer

Qt Creator 4.0+ can be used to open the PySide and Shiboken CMakeLists.txt files as projects, and thus provide usual IDE features for developing PySide - project file navigation, code completion (C++ only), following symbols under cursor (C++ only), syntax highlighting, locator usage, debugging, etc.

Currently there is a limitation that Shiboken has to be built first using the terminal, because the installed shiboken CMake packages will have to be specified for the PySide project in Qt Creator.

The steps for opening the projects in Qt Creator are:

  1. Open pyside-setup/sources/shiboken2/CMakeLists.txt, and specify a 5.11 Qt Kit to be used
  2. Build the project as usual (by pressing the build icon for instance)
  3. Open pyside-setup/sources/pyside2/CMakeLists.txt, and specify the same 5.11 Qt Kit
  4. Go to projects tab, and under the Build / CMake section find the Shiboken2_DIR setting. You have to specify the path to the folder where the Shiboken CMake package was installed when you compiled Shiboken from the terminal·
  5. An example path under MacOS is /Users/user/Dev/pyside2-setup/pyside_install/py3.6-qt5.11.1-64bit-debug/lib/cmake/Shiboken2-2.0.0. The path has to be adjusted depending on the user folder name, the version of python and qt, etc
  6. (Optional) On MacOS you also have to set the ALTERNATIVE_QT_INCLUDE_DIR setting to the Qt kit include path (e.g. /Users/user/Dev/qt511_source/include)
  7. Apply the CMake configuration changes (by pressing the button), and you should be able to build PySide

Now you can use the project explorer to look through the source cpp files, python files, use the locator feature to open files and file classes / methods, and other features that Qt Creator provides.

Troubleshooting / Known Issues

  • Qt 5.9 does not work with OpenSSL 1.1
    • When doing a custom Qt build (some unspecified versions for now), It is necessary to have an OpenSSL version of 1.0.x, since there are compatibility issues with newer versions of OpenSSL (see details)
  • PySide2 looks at the system installation if the local Qt version does not have a required module
    • The only workaround is to uninstall any module from the system, then PySide2 can look at only the Qt path currently being use.
  • Qt packages that directly link to OpenSSL (as opposed to runtime discovery) are not currently supported.
  • Make sure that the Python environment location where the PySide2 package will be installed is writable (otherwise you might get various permission denied errors). The install location can be found with 99% probability by running:
python -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())"