Broadcom97425/BCM7425-Qt5-eglfs

This article may require cleanup to meet the Qt Wiki's quality standards. Reason: Auto-imported from ExpressionEngine. Please improve this article if you can. Remove the {{cleanup}} tag and add this page to Updated pages list after it's clean.

Building AppLibs/RefSW for Qt

1. Locate document named "BroadcomReferencePlatformSetup.pdf" (Usually this will be inside a tar ball named on the lines of refsw_release_<chip-name><date>.tgz)
2. Follow the instructions in "BroadcomReferencePlatformSetup.pdf" to setup the Linux build machine
3. Locate document named "AppLibsInstallationBuildGuide.pdf" (Usually this will be inside a tar ball named on the lines of applibs_release<date>.tgz)
4. Follow the instructions in "AppLibsInstallationBuildGuide.pdf" to build Applibs

Qt5 eglfs/QPA

Building Qt 5

1. Obtain qt-5.0.0 from "git":http://wiki.qt.io/Building_Qt_5_from_Git (follow instructions in "Getting the source code")
2. Obtain 7425 specific files from "qt-platform-mkspecs git":http://gitorious.org/qt-platform-mkspecs (look for folder "5.0")
3. Copy folder named "linux-nxs-mipsel-uclibc-g+" from 7425 specific repo to <qt-5.0.0-git>/qtbase/mkspecs
4. Set following environment variables in the shell before configuring/building Qt,

BCM_APPLIBS_PATH=<path-till-Applibs-folder>/AppLibs
BCM_NEXUS_PATH=<path-till-Applibs-folder>/nexus
DEBUG=n

for example,

$$ export BCM_APPLIBS_PATH=/home/qtnokia/WorkDir/97425-P1/stb-rs_p2-al_p2dot1/AppLibs
$$ export BCM_NEXUS_PATH=/home/qtnokia/WorkDir/97425-P1/stb-rs_p2-al_p2dot1/nexus

1. Apply patch "7425-eglfs.patch" from 7425 specific repo to <qt-5.0.0-git>/src

$$ cd <qt-5.0.0-git>/src
$$ patch -p1 < 7425nxs-eglfs.patch

1. Configure Qt in qtbase folder as,

$$ configure -prefix /usr/local/qt-installs/qt5 -arch mips -qpa -xplatform linux-nxs-mipsel-uclibc-g''+ -depths 16,24,32 -no-largefile -opensource -verbose -system-zlib -system-libpng -system-libjpeg -system-freetype -fast -opengl -confirm-license -release -make libs -no-wayland -no-xcb

1. After the build succeeds set following environment variables before building any opengl Qt Apps,

- set QTDIR=/usr/local/qt-installs/qt5
 - set PATH=/usr/local/qt-installs/qt5/bin:$PATH

NOTE: Before executing any Qt applications on target copy "qt-installs/qt5" on target at usr/local on target file system