RaspberryPiWithQt6WebEngine

From Qt Wiki
Revision as of 23:37, 6 January 2024 by Michal Klocek (talk | contribs) (fix wrong link)
Jump to navigation Jump to search

Introduction

This page describes how to set up self-compiled Qt6 with WebEngine on Raspberry Pi 4 running Raspberry Pi OS.

To see other guides visit:

Setup

To be able to cross compile Qt6 for Raspberry Pi OS, we need three things:

Qt6 uses cmake therefore to cross-compile we need to have actually two builds of Qt. One Qt6 host build, which is later used to cross-compile the arm64 Qt build.

In this guide we are going to cross compile Qt 6.5 with WebEngine coming from Qt 6.7

  Note: As shown here, we could do a 'top level build' of Qt6, but we are going to do 'prefix module build' just to show an alternative way of building Qt6.

We need fours repositories to have Qt 6WebEngine up and running: qtbase, shadertools, qtdeclarative and qtwebengine.

  • Let's create our workspace:
    mkdir -p ~/workspaces/rpi/toolchain/sysroot
    mkdir -p ~/workspaces/rpi/toolchain/qt/build/host
    mkdir -p ~/workspaces/rpi/toolchain/qt/build/target
    mkdir -p ~/workspaces/rpi/target
    mkdir -p ~/workspaces/rpi/image
    
  • Let's checkout qt source code and select branches:
    cd ~/workspaces/rpi/toolchain/qt
    git clone git://code.qt.io/qt/qtbase.git
    cd qtbase
    git checkout origin/6.5.3
    cd ..
    
    git clone git://code.qt.io/qt/qtshadertools.git
    cd qtshadertools
    git checkout origin/6.5.3
    cd ..
    
    git clone git://code.qt.io/qt/qtdeclarative.git
    cd qtdeclarative
    git checkout origin/6.5.3
    cd ..
    
    git clone git://code.qt.io/qt/qtwebengine.git
    cd qtwebengine
    git checkout origin/6.7
    git submodule update
    cd ..
    

  Note: QtWebEngine needs initialization of the submodule.

Sysroot

To be able to cross-compile, we need a part of arm64 target sysroot to be present on our build machine. As shown here, you could simply start your Rasberry Pi OS on the board and then rsync the required libs and includes to the host machine with SSH connection. However, in this guide we will mount the Raspberry Pi OS image via a loop device, use qemu to install build dependencies and than make a local copy.

  Note: We do need a local copy of 'libs' and 'headers' from the image, as we want to adjust the symlinks.

  • Let's now download Raspberry Pi OS:
    cd ~/workspaces/rpi/image
    wget https://downloads.raspberrypi.com/raspios_arm64/images/raspios_arm64-2023-12-06/2023-12-05-raspios-bookworm-arm64.img.xz
    
  • Let's extract the image:
    unxz --keep 2023-12-05-raspios-bookworm-arm64.img.xz
    
  • We need add at least 2G space to the image to be able to fit qt build with debug info (see here instructions)
  • Make loop devices for the image:
    losetup -fP 2023-12-05-raspios-bookworm-arm64.img
    losetup -a
    /dev/loop0: [66306]:2363198 (~/workspaces/rpi/image/2023-12-05-raspios-bookworm-arm64.img)
    
  • Mount the root partition:
    mount /dev/loop0p2 -t ext4 ~/workspaces/rpi/target
    mount -t proc /proc ~/workspaces/rpi/target/proc
    mount -t sysfs /sys ~/workspaces/rpi/target/sys
    mount --bind /dev ~/workspaces/rpi/target/dev
    mount --bind /dev/pts ~/workspaces/rpi/target/dev/pts
    
  • We need qemu on the image to able to execute command, therefore copy static qemu binary to image.
    cp /usr/bin/qemu-aarch64-static ~/workspaces/rpi/target/usr/bin/
    

  Note: Setup of qemu static interpreter is distribution specific. Please refer to your Linux distribution documentation.

  • Chroot to arm64 target:
    cd ~/workspaces/rpi/target
    chroot .
    
  • Let's upgrade the image (optional) and install Qt6 build dependencies:
    vi /etc/apt/sources.list
    # uncomment the deb-src lines
    apt update
    apt upgrade
    apt build-dep libqt6gui6
    exit
    
  • rsync the parts that we need:
    cd ~/workspaces/rpi/toolchain
    rsync -av ~/workspaces/rpi/target/lib sysroot
    rsync -av ~/workspaces/rpi/target/usr/include sysroot/usr
    rsync -av ~/workspaces/rpi/target/usr/lib sysroot/usr
    
  • Adjust symlinks to be relative:
    wget https://raw.githubusercontent.com/Kukkimonsuta/rpi-buildqt/master/scripts/utils/sysroot-relativelinks.py
    chmod +x sysroot-relativelinks.py
    ./sysroot-relativelinks.py sysroot
    

  Note: Command-line tool called symlinks should not be used instead as it creates dangling links.

  • Umount no longer needed mounts:
    umount ~/workspaces/rpi/target/sys ~/workspaces/rpi/target/proc 
    umount ~/workspaces/rpi/target/dev/pts ~/workspaces/rpi/target/dev
    
  • Detach loop device:
    losetup -d /dev/loop0
    

Toolchain

To cross-compile Qt, we need a cross-compiler toolchain. There are many excellent tools to compile a toolchain, such as crosstool-ng. We could also simply download ready 3dparty toolchain form the internet. However, this guide will use the official gcc cross compiler, which is shipped with Debian distribution, same as the one shipped with Raspberry Pi OS. In time of writing this quide latest Raspberry Pi OS is called 'Bookworm' and it is shipped with gcc 12.2 and Qt 6.4. Therefore we will use the gnu gcc cross compiler from Bookworm release. To setup the cross-compiler toolchain will use 'debootstrap' which is a very convenient tool to install Debian base system into a subdirectory of any other running Linux system. Most of distributions ship this tool therefore it was selected as most generic approach.

  Note: The other approach could be for example installing Debian distribution on VM.

  • To setup Bookworm Debian release on your machine execute:
    debootstrap --arch amd64 bookworm ~/workspaces/rpi/toolchain http://ftp.uk.debian.org/debian
    
  • Let's mount and chroot into newly created installation:
    mount -t proc /proc ~/workspaces/rpi/toolchain/proc
    mount -t sysfs /sys ~/workspaces/rpi/toolchain/sys
    mount --bind /dev ~/workspaces/rpi/toolchain/dev
    mount --bind /dev/pts ~/workspaces/rpi/toolchain/dev/pts
    
    chroot ~/workspaces/rpi/toolchain /bin/bash
    
  • Let's install host and cross compiler:
    apt update
    apt install build-essential crossbuild-essential-arm64
    

Qt6 Host Build

  Note: After toolchain setup, we should be still chrooted into our host Debian root (~/workspaces/rpi/toolchain).

  • Let's install dependencies for Qt host build using know dependencies for Qt 6.4:
    apt update
    apt build-dep libqt6gui6
    

  Note: You need 'deb-src http://deb.debian.org/debian bookworm main' line in '/etc/apt/sources.list' file

  • Let's configure host build for Qt6 qtbase, build it and install into ~/workspaces/rpi/toolchain/opt/qt:
    cd /qt/build/host
    mkdir qtbase
    cd qtbase 
    /qt/qtbase/configure -release -nomake tests -nomake examples -linker lld -prefix /opt/qt
    cmake --build . --parallel
    cmake --install .
    

  Note: The path /qt/qtbase in chroot is really ~/workspaces/rpi/toolchain/qt/qtbase on the build machine.

  • Let's configure and build remaining modules:
    cd /qt/build/host
    mkdir qtshadertools qtdeclarative qtwebengine
    
    cd qtshadertools
    /opt/qt/bin/qt-configure-module ../../../qtshadertools
    cmake --build . --parallel
    cmake --install .
    cd ..
    
    cd qtdeclarative
    /opt/qt/bin/qt-configure-module ../../../qtdeclarative
    cmake --build . --parallel
    cmake --install .
    cd ..
    
    cd qtwebengine
    /opt/qt/bin/qt-configure-module ../../../qtwebengine
    cmake --build . --parallel
    cmake --install .
    cd ..
    

Qt6 Target Cross Build

  Note: After toolchain setup, we should be still chrooted into our host Debian root (~/workspaces/rpi/toolchain).

We should have by now Qt6 host build, target arm64 sysroot and cross compilation toolchain. To setup now cmake build we still need to create 'rpi.toolchain.cmake' file which will provide information to cmake about our toolchian and sysroot setup.